Skip to main content
Loading…
This section is included in your selections.

A. The requirements of this chapter will be observed where there is any conflict between this chapter and the National Electrical Code (NFPA 70), centrifugal fire pumps (NFPA 20), the emergency and standby power systems (NFPA 110), ANSI/TIA/EIA 568-B, ANSI/TIA/EIA 569-A, ANSI/TIA/EIA 607, or ANSI/TIA/EIA 570.

B. The National Electrical Code will be followed where there is any conflict between the standard for installation of stationary pumps for fire protection (NFPA 20), the standard for emergency and standby power systems (NFPA 110), ANSI/TIA/EIA 568-B, ANSI/TIA/EIA 569-A, ANSI/TIA/EIA 607, ANSI/TIA/EIA 570-B, and the National Electrical Code (NFPA 70).

C. In accordance with RCW 19.28.010(3), where the State of Washington Department of Labor and Industries adopts a more current edition of the National Electrical Code (NFPA 70), the building official may supplement use of this code with newly adopted editions of the National Electrical Code. Provisions in the annex chapters of the National Electrical Code shall not apply unless specifically referenced in the adopting ordinance. (Ord. 21C-01 § 1 (Exh. A); Ord. 10C-03 § 10).